Siamese valves are used to combine several hose lines into one. Clappers allow additional lines to be added without interrupting flow. FEATURES OF AKRON SIAMESE VALVES Style 4 Drainit Drain...

A fire 2-½” Hydrant Valve is used to control water flow through one of the discharge ports on a hydrant. FEATURES OF HYDRANT 2-½” VALVES Full flow valve with a Tork-Lok handle...

3-Way Ball Valve feeds three small diameter lines with a large diameter line. Relief valve standard. FEATURES OF 3-WAY BALL VALVES Dimensions: 12-¼” L x 16” W x 11” H...

Feed two small lines with one large line with the 2-Way Ball Valve. FEATURES OF 2-WAY BALL VALVES Dimensions: 10” L x 9” W x 8” H Weight: 11-½ lbs.  ...

Short 30° Storz LDH Elbow Adapters permit a smooth uninterrupted flow. Storz fitting in one end and female hose thread on the other. Hard anodized and powder coated for corrosion resistance and...

This 30° Elbows with Relief Valve and Air Bleeder is designed to connect large diameter hose to the suction intake where gate valves are not desired. With Rocker Lug or...

5-Way Manifold with Relief Valve is a light-weight, compact unit. In a simple, economical way it feeds four small lines with one large line, and continues with a large line. All outlets...

Clappered 2-Way Siamese supplies one LDH line with two smaller lines; one clapper design. FEATURES OF CLAPPERED 2-WAY SIAMESE  Dimensions: 10-½” L x 10” W x 5” H Weight: 10 lbs....

Clappered 3-Way Siamese supplies one LDH line with three smaller lines; each individually clappered. Dimensions: 14-½” L x 15” W x 9” H Weight: 17 lbs.   STORZ OUTLET X INLETS OPTIONS...

Clappered Jumbo Siamese supplies one LDH line with two LDH lines; each individually clappered. FEATURES OF CLAPPERED JUMBO SIAMESE Dimensions: 17-½” L x 15-½” W x 9-½” H Weight: 30 lbs....

This is a high quality gate valve for hydrant or pumper use. Harrington Inc.'s lightweight and compact Gate Valve incorporates an air bleeder into the non-rising stem design. FEATURES OF...

Harrington Inc.'s traditional Piston Intake Relief Valve is designed for pumper intake control. Featuring a 45° integrated elbow, a field adjustable pressure relief valve (adjustable from 75- 250 PSI) and...

This Drain Valve is designed for use with apparatus valves; pull to drain, push to close. FEATURES OF ELKHART BRASS DRAIN VALVES ¾” NPT on both inlet and outlet 2-¼” handle...

Relief Valves are used to automatically bypass discharge from pump when nozzle is shut off or pressure becomes excessive. When pressure is relieved or the nozzle is opened, the valve...

The Check and Bleeder Valve is a valuable tool when using portable pumps that are pumping to higher elevations. The valve is attached to the discharge of the pump. When...

Designed to be placed in a 1-½” hose line at various intervals. The 1” branch can provide water to a hose line, fill back pumps or canteens. FEATURES OF HOSE...