Optional Features

Some of the most popular options for End Mount and Top Mount Slip-on Units are shown here.

23 HP PUMP & ENGINE

  • Centrifugal pump powered by a 23hp Briggs & Stratton Engine
  • Manual recoil and 12-volt electtric starter

23 hp pump



26 HP PUMP & ENGINE

  • High pressure Centrifugal pump powered by a 26hp Kubota Engine
  • Maximum output of 26.5hp @3600 RPM, 58.1 cubic inches displacement
  • 4-cycle, diesel fueled

26 hp pump



HOSE REEL OPTIONS

aluminum electric reel



HYDRANT FILL

  • Provides quick refill from a hydrant or water tender
  • Standard is a 1½” or 2½” fire service slip-out valve
  • Choice of 1½” male NST with cap or 1½” female swivel with plug

Hydrant Fill

Slip-on options

End Mount Slip-on with optional 26 HP Diesel Pump & Engine, Foam Pro,  Hydrant Fill, Hose Tray, Liquid Level meters, Aluminum Electric reel, Spare Tire bracket, and aluminum equipment boxes and baskets.


 

WILDLAND MONITOR

  • Designed specifically for water tankers and pumpers where discharges of 350 GPM or less is required
  • Ideal for discharging water or Class A foams in wildland firefighting
  • 360 degree horizontal travel and 140 degree of horizontal movement
  • Locking knobs for locking in any position

Wildland MonitorWildland Monitor



AKRON FORESTRY MONITOR

  • CAN proportional speed joystick control
  • Lightweight Pyrolite construction
  • Integrated and sealed electronics
  • Waterproof (IP 67 rated) locking connectors
  • Simple "plug and play" installation
  • 320 degree maximum rotation range with stops at +/- 90 degrees
  • 135 degree maximum elevation range with stops at +45 degrees and -20 degrees
  • 12V or 24V option

Forestry MonitorForestry Monitor



SPARE TIRE BRACKET

  • Increase the amount of available space in your truck bed and make easy access to your spare

Spare Tire bracket

FOAM FLO™

FOAM PROPORTIONER

  • Proportions Class A foam into hose line
  • Selector value controls the percentage of foam metered into the pump
  • Standard foam tank size is 15 gallons with other sizes available

Foam Flo foam proportioner



FOAM PRO®

FOAM PROPORTIONER

  • Smoothest proportioning available at low flows for the best foam generation
  • Designed for slip-on pumper units and smaller forestry pumpers
  • Fully automatic foam proportioning regardless of changes in flow or pressure
  • Delivers total accuracy over entire range of flow

Foam Pro foam proportioner



LIQUID LEVEL GAUGES

  • Get liquid level readings at a glance
  • IntelliTank Foam and Water gauges

Liquid Level gauges



HOSE TRAY

  • Constructed from heavy aluminum diamond plate
  • Hinged top for easy loading of hose
  • Turtle tile base
  • Rotary joint enables hose removal from either side
  • Full-flow ball valve controls water flow
  • Accommodates 200’ of 1½” hose

Hose Tray